45 Ton 96″ x 12″C-Frame Multi Station Press System 45 Ton – Heavy duty fabricated steel C-frame design. Platen Size: 96” (L/R) x 12” (F/B) Single piece, gun-drilled for thirty (30) cartridge type heaters and five (5) thermocouple per platen. Four (4) 3 ¼” diameter bore, double acting heavy duty tie-rod cylinders. Maximum Operating Temperature: […]
Recent Projects – Accudyne Hydraulic Presses
Shipped: 300 Ton 51″ x 48″ Custom Hydraulic Press System
Platen Size: 51″ x 48″ Heavy Duty 4-Post design Self Contained Hydraulic and Electrical Systems OSHA compliant safety features interlocked to E-circuit.
Shipped: 200 Ton Composites Forming Hydraulic Press System
98″ x 48″ Platen Size 200 Ton Composites Forming Hydraulic Press System Rigid four-post construction, up-acting configuration with fabricated steel head and base bolster, and solid plate steel moving bolster. Platens: Single piece, 96” (L/R) x 48” (F/R) x 3½” nominal thickness, each gun-drilled for twenty-seven (27) cartridge type heaters, three (3) thermocouples […]
Shipped: 30 Ton Model LP-1830 Cabinet Style Hydraulic Presses
30 Ton Model LP-1830 cabinet style pressesMain Cylinder: 6” Bore, double-acting heavy-duty tie rod cylinder. 18” x 18” Platen Size Includes position transducer for programmable position control for low pressure Pre-heat/Kiss and to transition from closing speed to pressing speed and pressing speed to opening speed. Pressure set-point is programmable and controlled via proportional pressure […]
Shipped: 250 Ton Down Acting Composites Forming Press System
250 Ton Hydraulic Press system designed for composite molding applications. 50″ x 32″ Platen size 50″ daylight Three (3) 15 Ton eject cylinders Operator interface terminal capable of storing up to 100 process recipes. This system was installed at a domestic science research lab.
Shipped: 200 Ton Hot Forming (HF) Press System
200 Ton Hot Forming (HF) press system. Platen Size: 48″ x 48″ Down-acting, designed for maximum operating temperature of 1500F. Self-contained hydraulic, power unit, electrical, heating controlled by industrial computer interface with Accudyne HF process control software. Designed for forming Titanium aerospace components and includes automated tool-part loader/unloader.
Shipped: 600 Ton Embossing Press System
600 Ton Embossing Hydraulic Press System. 12” (L/R) x 12” (F/B) Work Area Bed Size Daylight Opening: 6” between hardened work plates. Press system is completely self-contained unit with press, hydraulic system and electrical control panel mounted on a fabricated frame.
Shipped: 1100 Ton Hydroforming Press System
Custom Designed, engineered and manufactured 1100 Ton Hydroforming Press Heavy Duty 4-Post design (1) 70″ x 30″ Working area bed size Self Contained Hydraulic & Electrical Control systems
Shipped: 100 Ton, 36″ x 23″ Resin Transfer Molding Presses – Set of 5
100 Ton, Composite Hydraulic Press System. 36″ x 23″ Platen Size. Designed for Resin Transfer Molding (RTM) application. Manufactured as a Set of 5 for an aerospace subcontractor creating a new composites molding division.
Shipped: 1750 Ton, 54″ x 64″ 12 Daylight Vacuum Lamination System
1750 Ton, 54″ x 64″ Vacuum Lamination Press System Twelve (12) daylights each with automatic loading/unloading for circuit board materials. Platen material is A-36 carbon steel, ground flat and parallel within .0007″ per linear foot and to 32-63 RMS surface finish. Gun-drilled and serpentine channeled for high temperature Dowtherm A thermal fluid heating application. Slab-side […]
